|
QCM INDUSTRIAL |
|
COMPRESSION MOLDING EPOXY SYSTEM FOR SNOWBOARDS, WAKEBOARDS, WATER-SKIS AND SNOW-SKIS Try QCM epoxy systems, the largest supplier of epoxy resin and hardener to the Board and Ski Industry. With 5 basic resins, 7 basic hardeners and pigmentation available, we have the system for your compression molding press. These resins are used in the wet-lay up of fiberglass around a wood or urethane-foam core and can be cured at room temperature or at elevated temperatures. They can be compression molded or vacuum-bagged. Also, canoe paddles and hockey sticks can be made using compression molding techniques. See Paddles. RESINS* VISCOSITY TYPE EMV-0049 10,000-13,000 cps Medium viscosity. EHV-0050 12,000-14,000 cps Thick, fast. (Same as EHV-0052) EMV-0043 7,000-9,000 cps Medium viscosity, Slower. ETH-003 16,000-18,000 cps Excellent anti-pinhole. EHV-0047 18,000-28,000 cps High Temperature/ High Chem. Resistance ELV-0020 500-700 cps Low viscosity Resin (High Performance) ELV-0010 500-700 cps Low viscosity Resin ( Very Low skin Irritation) HARDENERS* ECA-312 160 cps Easy lay-up, thin, fast. ECA-313 200 cps Easy lay-up, thin, slower. ECA-348 3,500 cps Thicker, fast. ECA-032 900 cps Thin, slow, easy lay-up. ECA-315 250 cps Thin, slow, easy lay-up. ECA-408 80 cps Thin, long pot life, high temp fast cure. ECA-375 100 cps Thin, fast cure. * See Technical Data Sheet for each product. QCM Company has a fully equipped Q.C. and testing lab to give the best, most consistent products available today. We provide compression and tensile testing and consultation to meet your specific needs. Three technicians, one chemist and one mechanical engineer work on optimizing your products. Call toll-free 1-800-321-0170 for technical service. QCM is a chemical compounder of epoxy formulations. We have supplied the water ski industry for 20 years and make every kind of molding epoxy ever used, e.g. colored epoxies, thick and thin epoxies, fast and slow epoxies, Kevlar and graphite reinforced epoxies. Confidentiality is the key. To be able to supply so many of the water-ski, wakeboard and snowboard manufacturers with the best custom formulations, complete secrecy is a must. Never is any of your specialty design and engineering know-how passed on to anybody else. Call for consultation or samples. or e-mail us:
|
|
|