EAS-39 FIVE (5) MINUTE EPOXY
LIQUID SYSTEM
EAS-39 Epoxy Adhesive System is a very rapid setting epoxy for bonding substrates such as concrete, wood, metal, ceramics, glass and many plastic materials. It is available in three different viscosity grades, high, medium and low.
SPECIFICATIONS
MIX RATIO: 1 to 1 By weight or volume
VISCOSITY@ 77 deg.F Part A Part B
HV 10-14,000 cps 14,500 cps
MV 7- 8,000 cps 14,500 cps
LV 700 cps 14,500 cps
(If paste is needed - see EAS-21 Five Minute Epoxy)
POT LIFE (400 gms) 2 - 5 minutes (72 deg. F)
CAUTION: Mix only enough that can be used within 5
minute work life!
CURE RATE ( 3/16" layer) Hardness (Shore D Scale)
+ 30 Minutes D-72 (handleable)
+ 1 Hour D-75
+ 2 Hour D-78
+ 3 Hour D-80
+ 4 Hour D-80
+ 5 Hour D-82
+ 6 Hour D-80
+ 7 Hour D-78
+ 1 Day D-75
+ 4 Days D-72
+ 7 Days D-80
7 DAY IMPACT STRENGTH
1 pound falling ball impact
6 foot - lbs. epoxy break
HEAT DISTORTION 45 minutes @ 120 deg. F
Hardness: Shore D 58
RECOMMENDED APPLICATION TEMPERATURE: 32 - 120 F.
MAXIMUM SERVICE TEMPERATURE: 160 F.
CLEAN UP Use MEK or Acetone (see Material Safety Data Sheet)
HAZARD WARNING
AVOID CONTACT WITH SKIN OR EYES.
Wash skin with soap and water if contact. flush eyes with water for 15 minutes if contact. CONSULT PHYSICIAN IMMEDIATELY. SEE M.S.D.S.
PROPERTIES: Good environmental resistance against dilute acids and alkalis.
SHELF LIFE: Guaranteed six (6) months when stored in sealed containers at temperatures between 50 - 90 F. Part A subject to crystallization when stored in intermittent cool temperatures for prolonged periods.
e-mail to roy@qcminds.com