EHV-0047HIGH TEMP. EPOXY RESIN
EHV-0047 is a high strength, high temperature resistant epoxy resin that has good chemical resistant properties.
This epoxy resin was designed for wet lay-up laminating of epoxy composites and wood. It has excellent adhesion to many plastics, including P-tex, pbt and many other substrates.
It has been used in the manufacture of composite water-skis and snowboards.
APPLICATIONS:
 | High Temp Encapsulating and Molding |
| Composites |
| Chemical Resistant Coatings |
| Primary Flooring resin for High Chemical Resistance |
| Laminating Resin |
| For an Epoxy wIth a functionality of 2.65, this product has an unusually low viscosity. EHV-0047 also has low hydrolyzable chlorides with good reactivity. It is non-crystallizing and can be used with all standard curatives, especially ECA-408 high temp. hardener. This product will cure at room temp. or elevated temperatures (for higher heat distortion properties). |
TYPICAL PHYSICAL PROPERTIES
Weight per epoxide 165-178
Viscosity Range 18,000-28,000 cps @ 77 DEG F
Weight per Gallon 9.9 to 10.01 @ 77 DEG F.
Flash Point > 480 DEG F COC
Hydrolyzable chloride, max % 0.10
Hazardous Ingredients None
Gardner Color 3
REACTIVITY DATA
Incompatibility: Strong acids and bases
Materials to avoid: Mercaptans, bases
Hazardous decomposition products: Carbon dioxide, carbon monoxide
HEALTH HAZARD DATA Effect of over-exposure:
SLIGHTLY TOXIC If appreciable quantities are swallowed, seek medical attention.
INHALATION (BREATHING)
Inhalation of vapor can cause headaches, nausea, dizziness and respiratory tract irritation (especially when heated to high temperatures). Remove to fresh air.
SKIN (CONTACT & ABSORPTION)
May cause skin irritation and sensitization. In case of contact, flush with water.
EYE (CONTACT) May cause eye irritation. flush with plenty of water for 15 minutes. Seek medical attention.
HANDLING PRECAUTIONS
Avoid contamination of skin; remove and thoroughly launder contaminated clothing; discard contaminated shoes.
STORE AWAY FROM FLAME.
SEE MSDS.
for more info please contact: roy@qcminds.com