QCM INDUSTRIAL

EMV-0043 EPOXY RESIN

EMV-0043 Epoxy resin was designed for wet lay-up laminating of epoxy composites and wood. It has excellent adhesion to many plastics, including P-tex, pbt and many other substrates. It has been used in the manufacture of skateboards, water-skis and snowboards. EMV-0043 resin can be cured with many hardeners- see ECA-408, ECA-032, ECA-315., ECA-348

TYPICAL PHYSICAL PROPERTIES

Weight per epoxide 182-196

Viscosity Range         7,000-9,000 cps @ 77 DEG F

Weight per Gallon      9.6 to 9.8 @ 77 DEG F

Flash Point                > 390 DEG F CLOSED CUP

Hazardous Ingredients     None

REACTIVITY DATA

Conditions to avoid          Excessive heat

Incompatibility                Strong acids and bases

Materials to avoid            Mercaptans, bases

Hazardous decomposition              Carbon dioxide, carbon monoxide

products

HEALTH HAZARD DATA Effect of over-exposure:

INGESTION (SWALLOWING) LD 50 > 2.5/KG SLIGHTLY TOXIC

If appreciable quantities are swallowed, seek medical attention.

INHALATION (BREATHING)

Inhalation of vapor can cause headaches, nausea, dizziness and respiratory tract irritation (especially when heated to high temperatures). Remove to fresh air.

SKIN (CONTACT & ABSORPTION)

May cause skin irritation and sensitization. In case of contact, flush with water.

EYE (CONTACT)

May cause eye irritation. flush with plenty of water for 15 minutes. Seek medical attention.

HANDLING PRECAUTIONS

Avoid contamination of skin; remove and thoroughly launder contaminated clothing; discard contaminated shoes.

STORE AWAY FROM FLAME.

SEE MSDS.

e-mail to:  roy@qcminds.com

RETURN TO HOME PAGE