|
QCM INDUSTRIAL |
|
EMV-0049 EPOXY RESIN EMV-0049 Epoxy resin was designed for wet lay-up laminating of epoxy composites and wood. It has excellent adhesion to many plastics, including P-tex, pbt; and many other substrates. Another advantage of EMV-0049 formulation is a stress relief additive that may eliminate post cure hair-line cracks. It has been used extensively in the manufacture of water-skis and snowboards. TYPICAL PHYSICAL PROPERTIES Weight per epoxide 182-190 Viscosity Range 10,000-13,000 cps @ 77 DEG F Weight per Gallon 9.5 to 9.7 @ 77 DEG F Flash Point > 350 DEG F CLOSED CUP Hazardous Ingredients: None Color Apha 100 (max) REACTIVITY DATA Conditions to avoid Excessive heat Incompatibility Strong acids and bases Materials to avoid Mercaptans, bases Hazardous decomposition Carbon dioxide, carbon monoxide products HEALTH HAZARD DATA Effect of over-exposure: INGESTION (SWALLOWING) LD 50 > 2.5/KG SLIGHTLY TOXIC If appreciable quantities are swallowed, seek medical attention. INHALATION (BREATHING) Inhalation of vapor can cause headaches, nausea, dizziness and respiratory tract irritation (especially when heated to high temperatures). Remove to fresh air. SKIN (CONTACT & ABSORPTION) May cause skin irritation and sensitization. In case of contact, flush with water. EYE (CONTACT) May cause eye irritation. flush with plenty of water for 15 minutes. Seek medical attention. HANDLING PRECAUTIONS Avoid contamination of skin; remove and thoroughly launder contaminated clothing; discard contaminated shoes. STORE AWAY FROM FLAME. SEE MSDS. e-mail to roy@qcminds.com
|
|
|