MF-231 URETHANE - BASED

FABRIC TOP COAT

 MF-231 IS AN AIR-DRY WATER BASE TOP COATING FOR SURFACE DESIGNS ON FABRICS, GARMENTS, PLASTICS OR METAL SURFACES. IT CAN BE MIXED WITH GLITTER AND WATER-BASE PIGMENTS FOR SPECIAL EFFECTS.

ALWAYS WASH TEST YOUR PRINTS AND DESIGNS BEFORE PRODUCTION RUNS. IT CAN BE SILK-SCREENED OR HAND APPLIED AND CAN BE AIR-DRIED OR HEAT CURED FOR FASTER DRYING.

MF-231 IS AN ALIPHATIC URETHANE WHICH EXHIBITS CLEAR TOUGH, FILM PROPERTIES WITH VERY SOFT HAND.  THE VISCOSITY RANGE ALLOWS FOR CONTROLLED PENETRATION INTO FABRIC.  WHEN PROPERLY CROSS-LINKED, EXCELLENT WASH RESISTANCE PROPERTIES ARE OBTAINED.

 

VISCOSITY:                                30,000 CPS

SOLIDS:                                    38%

PH:                                             9.5 TO 10.5

FLASH POINT:                            NONE (TAG C.C.)

WT/GALLON:                              8.7

CO-SOLVENT:                           19.3% NMP

SURFACE TENSION:                  61 DYNES/S/CM

SOFTENING POINT:                  330 DEGREES F

V.O.C.:                                        390 GRAMS/LITRE

FREEZE/THAW STABILITY:      5 CYCLES

100% MODULES:                       630 PSI

TENSILE STRENGTH:              4500 PSI

ELONGATION AT BREAK:        575

SWARD ROCKER HARDNESS:      15