QCM INDUSTRIAL

P7002 BASE PLASTISOL & COLORS

This product is designed around Military Specification P20689D.

SUPERSEDED by "Mil A-A-59464A Plastisol for coating metal Objects"

P7002 Plastisol is a 100% solids, free flowing liquid vinyl dispersion with a gel temperature of approximately 170^oF. and a fusion temperature of 350^oF. After fusing it becomes a tough, flexible coating: resistant to acids, cleaners, plating solutions, petroleum fuels, detergents and salt water. It is an excellent material for dip coating, providing a decorative, protective and insulative coating as well as for making molded parts. This type of plastisol is widely used for coating plating racks for the plating industry, tool handles, many types of gaskets, etc.

Where adhesion to metal is required, plastisol primer is necessary. QCM Co.'s A-1104 is recommended.

TYPICAL PHYSICAL PROPERTIES

Durometer Hardness:          Shore A 70 plus/minus 3

Tensile Strength:                  Greater than 1700 psi

Elongation:                           Greater than 350%

Viscosity:                            1000 cps to 5,000 cps

Brittle Temperature:             Tested to -40^oF. (still flexible)

Water Absorption 48 Hours     0.30%

                             6 Days     0.42%

Dimensional Change                  0.66% (24 hours @ 160^oF.)

Specific Gravity :                         1.18

Color:                      Any color. We frequently match colors to Federal Standard 595.

Dielectric Strength (short time):       (1/8th inch thick) 300-400 volts/mil.

Shelf Life:  12 months guaranteed in sealed container, kept away from heat and moisture.

Safety Information:  See MSDS

for technical assistance  roy@qcminds.com  
 

RETURN TO HOME PAGE