QCM INDUSTRIAL

MATERIAL SAFETY DATA SHEET

QCM COMPANY   No.P7002                                                                 Plastisol Various Colors

930  Central Ave.   So.                                                                          Date 5 / 7 /08

Kent, WA 98032                                                                                   Prepared by Roy Wheeldon

Phone:     (253) 859-0933           1- 800-321-0170 within USA.

FOR EMERGENCY HAZARDS/SPILLS ONLY CALL CHEMTREC 1-800-424-9300

SECTION I MATERIAL IDENTIFICATION      Chemical Name Trade Name and Synonyms: VINYL PLASTISOL and  P7002 PLASTISOLS

Specification per Mil. P20689D Various Colors            Formula: MIXTURE: TRADE SECRET

Now superseded by Mil A-A-59464 A

Chemical Family: POLYVINYL CHLORIDE WITH NON-ORTHOPHTHALATE PLASTICIZER

SECTION II INGREDIENTS AND HAZARDS

THESE PRODUCTS DO NOT CONTAIN 1% OR MORE OF ANY KNOWN CURRENTLY LISTED HAZARDOUS MATERIALS NOR DO THEY CONTAIN 0.1% OR MORE OF ANY CARCINOGENIC OR SUSPECTED CARCINOGENIC AGENT AS DEFINED IN 29 CFR 1910.1200.

Chemical Name CAS #'S                         |   %         |      Exposure Limits in Air

                                                            |                |     ACGIH (TLV)         OSHA (PEL)      

NON-ORTHOPHTHALATE PLASTICIZER   |    30to60   |     NOT HAZARDOUS-NON-TOXIC

EPOXIDIZED SOYBEAN OIL                      |    1to4      |     NOT HAZARDOUS-NON-TOXIC

PVC RESIN                                            |   30to60    |      NOT HAZARDOUS-NON-TOXIC

ZINC CARBOXYLATE STABILIZER             |   0.5%to2  |      NOT HAZARDOUS-NON-TOXIC

SECTION III PHYSICAL DATA

Boiling point at 1 atm, deg F: N/A                             Specific gravity (H20=1): 1.1

Vapor pressure at (mm Hg):   N/A                               Evap. Rate ( BuAc = 1) N/A

Vapor density (Air=1): N/A                                         Volatiles, % by Volume: N/A

Water solubility: NEGLIGIBLE                                     Molecular weight: MIXTURE

Appearance & Odor: VARIOUS COLORED LIQUID - VISCOUS

Viscosity: N/A                 pH: N/A             Decomposition Temp: N/A                 Corrosion Rate: N/A

SECTION IV FIRE AND EXPLOSION DATA

Flash Point & Method: SOLIDIFIERS                                 Autoignition Temp.: N/A

Flammability Limits in Air:    SOLIDIFIES @ 200 F                 Upper: N/A Lower: N/A

Extinguishing Media: DRY CHEMICAL, REGULAR FOAM OR WATER FOG.

Special Fire fighting procedures: WEAR SELF-CONTAINED BREATHING APPARATUS IF IGNITED.

Unusual fire and explosion hazards: TOXIC GASES CAN FORM - CARBON DIOXIDE, CARBON MONOXIDE, VARIOUS HYDROCARBONS

SECTION V HEALTH HAZARD INFORMATION   | TLV:   ACGIH & OSHA  TWA   5mg/cu m of air

Effect of Overexposure:

FIRST AID:

Eye Contact: MAY CAUSE IRRITATION. FLUSH WITH WATER FOR 15 MINUTES

Skin Contact: CAN CAUSE SLIGHT IRRITATION. WASH WITH SOAP AND WATER.

Inhalation: SMOKE SHOULD BE VENTED IF HEAT PROCESSED. IF EXCESSIVE INHALATION,                           REMOVE TO FRESH AIR.

Ingestion:  CAN CAUSE GASTROINTESTINAL IRRITATION, NAUSEA, VOMITING AND DIARRHEA. CONSULT A PHYSICIAN.

PRIMARY ROUTES OF ENTRY INTO THE BODY: SKIN ABSORPTION AND INHALATION OF FUMES DURING HEAT PROCESSING.

SECTION VI. REACTIVITY DATA

Stability:                 |stable    |   X   |                     Conditions to avoid: HIGH TEMPERATURES

|unstable |       | 

Incompatibility: (Materials to avoid) : STRONG OXIDIZING AGENTS.

Hazardous decomposition products: CARBON MONOXIDE, CARBON DIOXIDE, VARIOUS

HYDROCARBONS, HYDROGEN CHLORIDE.

Hazardous                         |may occur      |    |                   Conditions to avoid:

Polymerization:                  |may not occur | X |

SECTION VII. SPILL, LEAK, AND DISPOSAL PROCEDURES

Spills, leaks: (Steps to be taken) SMALL SPILLS: ABSORB ON VERMICULITE

OR FLOOR DRY. LARGE SPILLS: PUMP TO SALVAGE TANK.

Waste Disposal Method: INCINERATE ACCORDING TO LOCAL AND FEDERAL STANDARDS.

SECTION VIII. SPECIAL PROTECTION INFORMATION

Respiratory protection: (Specify Type)      RECOMMENDED IF NO LOCAL EXHAUST:

 NIOSH APPROVED RESPIRATOR.

Ventilation:   |Local exhaust:    RECOMMENDED FOR HEAT PROCESSING        | Special:

                   |Mechanical  (General)       RECOMMENDED                                   |    Other:

Protective gloves: POLYETHYLENE TYPE                |Eye protection: SAFETY GLASSES,

                                                                              |GOOD INDUSTRIAL HYGIENE.

Other protective equipment and precautions: WASH WITH SOAP AND WATER IF CONTACT

WITH SKIN. WASH CONTAMINATED CLOTHING BEFORE RE-USE.

SECTION IX. SPECIAL PRECAUTIONS AND COMMENTS

Storage & Handling Information: CONTAINERS MAY BE HAZARDOUS WHEN EMPTIED DUE TO VAPOR BUILD-UP. STORE BETWEEN 50 F AND 90 F, AWAY FROM HEAT, MOISTURE OR FLAME.

Other Precautions:  ALL HAZARD PRECAUTIONS IN THE DATA SHEET MUST BE OBSERVED.

DOT Class: NOT REGULATED.           

NON-HAZARDOUS. NOT TOXIC.

     HMIS                                                 |HAZARD IDENTITY |

                                                      |Health          | 1 |

                                                                |Flammability | 1 |

                                                                |Reactivity     | 0 |

                                                                |Contact        | B |

Judgments as to the suitability of information herein for purchaser's purposes are necessarily purchaser's responsibility. Therefore, although reasonable care has been taken in the preparation of such information, QCM Co. extends NO warranties, makes NO representations and assumes no responsibility as to accuracy or suitability of such information for application to purchaser's intended purposes of or for consequences of it's use.

Prepared by Technical Manager, QCM Co.

RETURN TO HOME PAGE